Newest Updates in Physical Science Research Vol. 7

Abstract

A novel design of optical directional coupler switch with S-bend waveguides on LiTaO₃ platform has been designed with R-Soft CAD tool and the same is simulated by Beam propagation method (BPM) for light propagation analysis. The simulation results of the optical directional coupler (ODC) switch is reported. We observed that the directional coupler (DC) switch has lower insertion losses and higher extinction ratios for a certain values that are discussed in the paper. This was studied by variation in waveguide parameters such as, wavelength, waveguide gap, and length of the device. Simulation results designate that the switching efficiency for TE and TM modes with extinction ratio about 3dB when the waveguide gap is 3.5 ?m for both the polarization modes and insertion loss is 13dB with same waveguide gap in TE mode and 16dB in TM mode at 1550 nm wavelength. This symmetrical optical directional coupler switch can be used as key components for integrated optical communication devices and useful for build up functional devices.