Corrosion Resistance of Ti6Al4V Alloy by Radio Frequency Technique used for Coating Deposition of Multilayer (HA/TiN/Ti6Al4V-Substrate) for Optimization Power

Authors

  • Mustafa A. Mahmood Department of Medical Physic, College of Science, Alkarkh University of Science, Iraq.
  • M. A. Ulkareem Department of Physics, Baghdad Factuality Science, Baghdad, Iraq.
  • F. T. M. Noori Applied Physics Center, Materials Research Directorate, Iraq.
  • M. K. Khalaf Applied Physics Center, Materials Research Directorate, Iraq.

DOI:

https://doi.org/10.9734/bpi/fraps/v7/5143B

Keywords:

Sputtering, HA, corrosion, polarization, TiN, electrochemical, power

Abstract

The objective of this study is to perform physical / chemical characterization and to determine the corrosion resistance of calcium-phosphate (HA), TiN-based bio-ceramics and thin metal plating processed by a Ti-6Al-4V process. TiN and HA coating maximum power 150 watts. The presence of TiN200 Watt TiN s coating resulted in electrochemical corrosion. High current cathodic and passive anodic polarization shows an active surface. EIS shows the active behavior assumed by the active cathodic currents imposed. And HA on the sample surface, some noise was observed during both polarization and EIS tests.

Published

2023-07-03

How to Cite

Mustafa A. Mahmood, M. A. Ulkareem, F. T. M. Noori, & M. K. Khalaf. (2023). Corrosion Resistance of Ti6Al4V Alloy by Radio Frequency Technique used for Coating Deposition of Multilayer (HA/TiN/Ti6Al4V-Substrate) for Optimization Power. Fundamental Research and Application of Physical Science Vol. 7, 111–125. https://doi.org/10.9734/bpi/fraps/v7/5143B

Issue

Fundamental Research and Application of Physical Science Vol. 7

Section

Chapters