Physical Properties of Dispersed Silica: A Recent Study

Authors

  • E. Tserenjav Laboratory for New Materials, School of Engineering and Applied Sciences, National University of Mongolia, Mongolia.
  • V. Jigmeddorj Department of Physics, School of Art and Sciences, National University of Mongolia, Mongolia.
  • B. D. Lygdenov Department of Metallurgy, East Siberian University of Technology and Management, Russia.
  • U. Bayaraa Laboratory for New Materials, School of Engineering and Applied Sciences, National University of Mongolia, Mongolia.
  • U. Magvan Laboratory for New Materials, School of Engineering and Applied Sciences, National University of Mongolia, Mongolia.

DOI:

https://doi.org/10.9734/bpi/aaer/v13/8437D

Keywords:

X-ray diffraction, dispersed silica, physical properties, photon cross correlation spectroscopy (PCCS)

Abstract

In this paper physical properties as distribution width (Qx,%) and density (qx,%) of colloidal dispersed system were defined photon cross correlation spectroscopy (PCCS) at average size as 17.06nm for D50, % and area of specific surface as 349.96 m2/cm3 depending on molar (Rm2) optimal ratio of silica stone mineral to alkali ash powder. By X-ray diffraction analysis was determined its change of crystal structure to amorphous state. The results of their kinematic viscosity, liquid density, UV light adsorption inspection show that possibility to produce that colloidal silica by using the wetting and ultrasonic vibration method for that fusible alloy.

Published

2021-05-12

How to Cite

E. Tserenjav, V. Jigmeddorj, B. D. Lygdenov, U. Bayaraa, & U. Magvan. (2021). Physical Properties of Dispersed Silica: A Recent Study . Advanced Aspects of Engineering Research Vol. 13, 1–10. https://doi.org/10.9734/bpi/aaer/v13/8437D

Issue

Advanced Aspects of Engineering Research Vol. 13

Section

Chapters